The other is your local area network and is typically 192.168.1.1 or 192.168.1.254 (depending on make, model and firmware). One is the wide area network (WAN) which is your public IP address. Opening the website in raspberry using w3m : The above image shows the port forwarding part !ĭo i have to set any firewall settings for it ? if yes then what all should i fill in the image below ? (the screenshot is at : !CUsz0KiD!yZLttj3bKifG. Problem! I could not see your service on 183.87.***.** on port (8000).Īnd my question is, "if" someone opens then, what page should appear (assuming 192.168.0.98 opens a index.html) Thank you so much, so i have to open on my raspberry pi right ? cuz when i open it on my mac, it says You can use the guide below for installing our DUC on the raspberry pi. Once created you will need to run and install our Dynamic Update Client (DUC). You should then see your hostname if you do not you will need to create one by clicking "Add A Host". You can do this when you login to No-IP and go to "Hosts/Redirects" or "Dynamic DNS" at the top left. Assuming you already have your account created you need to make sure you have created a hostname. Once you have the ports open you will want to make sure your account is setup correctly. You will use the public IP (external IP) you see on. If you have already done so you can check when you are at the location by going to and test to see if port 90 are accessible from outside your network. The first step will be port forwarding your router and opening port 90. Since you are using port 8000 (guessing this is your http port) you will be able to connect with your hostname adding colon port 8000 at the end for example. You will then be able to use your hostname to connect back to your network. If it detects an IP address change it will automatically update the hostname you created with the new IP address. When running the DUC it will check every five minutes to see if your IP address has changed. You will use the public IP (external IP) you see on Once you have the ports open you will want to make sure your account is setup correctly. My name is Hailee and I work for No-IP, I think I can help answer your question.
0 Comments
Leave a Reply. |